| 4000 | WLAN AutoConfig service has successfully started. | System |
| 4001 | WLAN AutoConfig service has successfully stopped. | System |
| 4002 | WLAN AutoConfig service has failed to start. | System |
| 4003 | WLAN AutoConfig detected limited connectivity, attempting automatic recovery. | System |
| 8000 | WLAN AutoConfig service started a connection to a wireless network. | Operational |
| 8001 | WLAN AutoConfig service has successfully connected to a wireless network. | Operational |
| 8002 | WLAN AutoConfig service failed to connect to a wireless network. | Operational |
| 8003 | WLAN AutoConfig service has successfully disconnected from a wireless network. | Operational |
| 8004 | Wireless network is blocked due to connection failure. | Operational |
| 8005 | WLAN AutoConfig service has begun starting the hosted network. | Operational |
| 8006 | WLAN AutoConfig service has finished starting the hosted network. | Operational |
| 8007 | WLAN AutoConfig service has failed to start the hosted network. | Operational |
| 8008 | AutoConfig service has begun to stop the hosted network. | Operational |
| 8009 | WLAN AutoConfig service has finished stopping the hosted network. | Operational |
| 8010 | WLAN AutoConfig service has failed to stop the hosted network. | Operational |
| 8011 | Connect to last good network. | Operational |
| 8012 | NLO discovery Network Adapter: Interface GUID: InterfaceGuid … | Operational |
| 10000 | WLAN Extensibility Module has failed to start. | System |
| 10001 | WLAN Extensibility Module has successfully started. | System |
| 10002 | WLAN Extensibility Module has stopped. | System |
| 10003 | WLAN Extensibility Module has stopped unexpectedly. | System |
| 10004 | WLAN Extensibility Module has timed out. | System |
| 11000 | Wireless network association started. | Operational |
| 11001 | Wireless network association succeeded. | Operational |
| 11002 | Wireless network association failed. | Operational |
| 11003 | Wireless security started. | Operational |
| 11004 | Wireless security stopped. | Operational |
| 11005 | Wireless security succeeded. | Operational |
| 11006 | Wireless security failed. | Operational |
| 11007 | Wireless IHV security started. | Operational |
| 11008 | Wireless IHV security succeeded. | Operational |
| 11009 | Wireless IHV security failed. | Operational |
| 11010 | Wireless security started. | Operational |
| 12011 | Wireless 802. | Operational |
| 12012 | Wireless 802. | Operational |
| 12013 | Wireless 802. | Operational |
| 12014 | Wireless 802. | Operational |
| 13001 | A pre-logon connection was not attempted. | Operational |
| 13002 | A pre-logon connection was attempted. | Operational |
| 13011 | A post-logon connection was not attempted. | Operational |
| 13012 | A post-logon connection was attempted. | Operational |
| 13013 | The post-logon connection attempt is complete. | Operational |
| 13014 | A post-logon connection was attempted. | Operational |
| 13100 | CostSource Cost is changed to CostValue for profile ProfileName on interface … | Operational |
| 13101 | Group Policy Cost is changed to CostValue. | Operational |
| 13102 | CostSource Cost is cleared for profile ProfileName on interface InterfaceGuid. | Operational |
| 13103 | Group Policy Cost is cleared | Operational |
| 14000 | Media notification received. | Diagnostic |
| 14001 | Peer notification received. | Diagnostic |
| 14002 | Enable AutoConfig. | Diagnostic |
| 14003 | Set media streaming mode. | Diagnostic |
| 14004 | Set BSS type. | Diagnostic |
| 14005 | Set radio state. | Diagnostic |
| 14006 | Start auto config. | Diagnostic |
| 14007 | Stop auto config. | Diagnostic |
| 14008 | Power setting = PowerSetting. | Diagnostic |
| 14009 | Change session to ConnectionId. | Diagnostic |
| 14010 | Radio is off. | Diagnostic |
| 14011 | Change radio state for interface = InterfaceDescription : PHY = PHY, software … | Diagnostic |
| 14012 | The connection is not healthy. | Diagnostic |
| 14013 | Profile Profile is updated. | Diagnostic |
| 14014 | ConnectionResetReason, need to disconnect. | Diagnostic |
| 14015 | Set current operation mode. | Diagnostic |
| 14016 | Got connection request, mode = ConnectionMode, flags = Flags, profile name = … | Diagnostic |
| 14017 | Connection cancelled by user. | Diagnostic |
| 14018 | Connection failed. | Diagnostic |
| 14019 | Stop all connection attempts for interface InterfaceDescription. | Diagnostic |
| 14020 | Connection succeeded on interface InterfaceDescription. | Diagnostic |
| 14021 | Connection complete on interface InterfaceDescription, session = ConnectionId, … | Diagnostic |
| 14022 | Got disconnect request. | Diagnostic |
| 14023 | Set profile Profile to manual temporarily. | Diagnostic |
| 14024 | Disconnecting. | Diagnostic |
| 14025 | Interface InterfaceDescription state is set to State. | Diagnostic |
| 14026 | UI request for interface InterfaceDescription result = Result. | Diagnostic |
| 14027 | Profile Profile HealthCheckResult. | Diagnostic |
| 14028 | Profile name change. | Diagnostic |
| 14029 | Interface InterfaceGuid (InterfaceDescription) is successfully initialized. | Diagnostic |
| 14030 | The current operation mode for interface InterfaceDescription is OpMode. | Diagnostic |
| 14031 | Interface InterfaceGuid type = Type. | Diagnostic |
| 14032 | Interface InterfaceGuid cannot be queried, error ErrorCode. | Diagnostic |
| 14033 | Failed to query physical medium for interface InterfaceGuid, because the device … | Diagnostic |
| 14034 | Found name FriendlyName for interface DeviceGuid. | Diagnostic |
| 14035 | Network SSID is not permitted. | Diagnostic |
| 14036 | Power setting = Setting. | Diagnostic |
| 14037 | Disconnect the temporary connection Profile for interface InterfaceDescription, … | Diagnostic |
| 14038 | Clear runtime state because the user who initiated the manual connection logged … | Diagnostic |
| 14039 | WTS session change. | Diagnostic |
| 14040 | Scan for networks. | Diagnostic |
| 14041 | Scan request is ignored because radio is off. | Diagnostic |
| 14042 | Scan results are not queried because raido is off. | Diagnostic |
| 14043 | The scan state machine is stopped. | Diagnostic |
| 14044 | No auto switch for the current connection (Profile). | Diagnostic |
| 14045 | Connection (auto = Auto) to SSID (multiple=Multiple) using profile ProfileName. | Diagnostic |
| 14046 | The session id=ConnectionId, active=Active, console=Console is added. | Diagnostic |
| 14047 | The state of session id=ConnectionId is refreshed to active=Active, … | Diagnostic |
| 14048 | Active Console User state = ActiveConsole. | Diagnostic |
| 14049 | The session id=ConnectionId is removed. | Diagnostic |
| 14050 | Discovery module has taken care of the UI request. | Diagnostic |
| 14051 | UI request not sent because the network is suppressed and the UI request is … | Diagnostic |
| 14052 | IntfCompleteTimely failed, error ErrorCode. | Diagnostic |
| 14053 | Session ConnectionId, Network suppressed status for Network is Suppressed. | Diagnostic |
| 14054 | Enable AutoConfig background scan. | Diagnostic |
| 14055 | Discard this round of background scan because a connection process is in … | Diagnostic |
| 14056 | Discard this round of background scan because the current connection does not … | Diagnostic |
| 14057 | Discard this round of background scan because the current connection is the most … | Diagnostic |
| 14058 | Connect to SSID with profile ProfileName. | Diagnostic |
| 14059 | Set operational state. | Diagnostic |
| 14060 | Profile State changed. | Diagnostic |
| 14061 | Profile State changed. | Diagnostic |
| 14062 | RpcCall WlanRpcCallType from client ClientProcessId. | Diagnostic |
| 14063 | SetAutoConfigParameterRpcCall for OpCode from process ClientProcessId. | Diagnostic |
| 14064 | SetInterfaceRpcCall for OpCode from process ClientProcessId. | Diagnostic |
| 14065 | PrivateSetInterfaceRpcCall for OpCode from process ClientProcessId on Interface … | Diagnostic |
| 14066 | InternalPrivateQuerySetInterfaceCall for OpCode on Interface InterfaceGuid. | Diagnostic |
| 14067 | Screen Power State changed. | Diagnostic |
| 14068 | Low Power State changed. | Diagnostic |
| 14069 | Adding WLAN Interface InterfaceGuid for InterfaceDescription. | Diagnostic |
| 14070 | Removing WLAN Interface Interface InterfaceGuid. | Diagnostic |
| 14071 | Expedited scan triggered on InterfaceGuid because ExpeditedScanTrigger. | Diagnostic |
| 14072 | Disconnect triggered on InterfaceGuid Reason: DisconnectTrigger. | Diagnostic |
| 14073 | Limited Connectivity Recovery Type: RecoveryType Event: EventType Data: … | Diagnostic |
| 14074 | Gateway Reachability State changed. | Diagnostic |
| 14075 | Update allowed connectivity token - AutoConnect=[Enabled: IsAutoConnectEnabled, … | Diagnostic |
| 14076 | Connectivity token update - AutoConnect=[Enabled: IsAutoConnectEnabled], … | Diagnostic |
| 20000 | Begin Connect API | Diagnostic |
| 20001 | Begin Disconnect API | Diagnostic |
| 20002 | Calling MSMSecPerformPreAssociateSecurity | Diagnostic |
| 20003 | Calling MSMSecStopSecurity | Diagnostic |
| 20004 | Connect completion reason Reason, session Session, adhoc formed AdHocFormed. | Diagnostic |
| 20005 | Received CONNECT COMPLETION, status Status, assocStatus AssocStatus. | Diagnostic |
| 20006 | FSM Current state CurrState, event EventId. | Diagnostic |
| 20007 | FSM Transition from State: CurrState to State: NewState. | Diagnostic |
| 20008 | Phy Type not compatible | Diagnostic |
| 20009 | Link Quality: Quality. | Diagnostic |
| 20010 | Received IHV PORT DOWN, peer BSSID. | Diagnostic |
| 20011 | Received IHV PORT UP, peer BSSID. | Diagnostic |
| 20012 | Post Connect Security has Completed Successfully | Diagnostic |
| 20013 | Post Connect Security has FAILED with reason code: ErrorCode. | Diagnostic |
| 20014 | Received Security Packet: PacketType. | Diagnostic |
| 20015 | Security PreConnect Completion, security reason: Reason, error Error. | Diagnostic |
| 20016 | Send Security Packet Length = Length and Completion Handle = Handle. | Diagnostic |
| 20017 | Send Security Packet Length = Length and Completion Handle = Handle. | Diagnostic |
| 20018 | SSID = SSID BSSIDCount = BSSIDCount. | Diagnostic |
| 20019 | A client has associated with the hosted network. | Operational |
| 20020 | A client has successfully authenticated with the hosted network. | Operational |
| 20021 | A client has failed to authenticate with the hosted network. | Operational |
| 20022 | Begin Scan | Diagnostic |
| 20023 | Scan completion Status Status. | Diagnostic |
| 20024 | Number of Unique Wlan Networks Count. | Diagnostic |
| 20025 | Visible Network: Ssid, BssidCount BSSIDS, AuthAlgoId/CipherAlgoId, Rssi RSSI. | Diagnostic |
| 21001 | Adapter(InterfaceGuid) New Adapter FriendlyName (PKMIDs). | Diagnostic |
| 21002 | Adapter(InterfaceGuid) IntfSecState Transition OldState --> NewState. | Diagnostic |
| 21003 | Adapter(InterfaceGuid) Received StopSecurity. | Diagnostic |
| 21004 | Pre-Associate Failure Auth AuthAlgoId, Cipher CipherAlgoId, OneX … | Diagnostic |
| 21005 | Received MSMSec UI Response, but already have key material! | Diagnostic |
| 21006 | Received UI response ResponseType. | Diagnostic |
| 21007 | TIMING OUT 802. | Diagnostic |
| 21008 | NOT TIMING OUT 802. | Diagnostic |
| 21009 | 802. | Diagnostic |
| 21010 | Port (PortId) Peer PeerAddr AuthMgr Transition OldState --> NewState. | Diagnostic |
| 21011 | Sending UI response to 802. | Diagnostic |
| 21012 | KeyExt Transition OldState --> NewState. | Diagnostic |
| 21013 | Explicit failure from 802. | Diagnostic |
| 21014 | 802. | Diagnostic |
| 21015 | Port(PortId) Peer PeerAddr KeyMgr transition OldState --> NewState. | Diagnostic |
| 21016 | Auth sent M1(PortId), self LocalAddr, peer PeerAddr. | Diagnostic |
| 21017 | Auth sent M3(PortId), self LocalAddr, peer PeerAddr. | Diagnostic |
| 21018 | Auth sent G1(PortId), self LocalAddr, peer PeerAddr. | Diagnostic |
| 21019 | Port(PortId) Peer PeerAddr KeyMgrAuth Transition OldState --> NewState. | Diagnostic |
| 21020 | CONNECTION SECURED by OFFLOADED key exchange | Diagnostic |
| 21021 | Port(PortId) Notify Key Exchange Status: Authenticator(Authenticator) reason … | Diagnostic |
| 21022 | Default Key: Idx Index, Algo CipherAlgoId, Direction= Direction, Len Len. | Diagnostic |
| 21023 | Pairwise Key (Addr): Algo CipherAlgoId, Direction= Direction, Len Len. | Diagnostic |
| 21024 | Adapter(AdapterId) Connect Completion, Reason Reason, Error Error. | Diagnostic |
| 21025 | Port(PortId) Indicate Security Result, Peer PeerAddr, Reason Reason Error Error. | Diagnostic |
| 21026 | Adapter(Context) Tx to PeerAddr, Ethertype EtherType, size Size. | Diagnostic |
| 21027 | Sending UI request to MSM (SessionId). | Diagnostic |
| 21028 | Adapter(InterfaceGuid) MSM Connect notification, Network "SSID". | Diagnostic |
| 21029 | Adapter(InterfaceGuid) MSM Disconnect notification. | Diagnostic |
| 21030 | Adapter(InterfaceGuid) Port up for peer PeerAddr. | Diagnostic |
| 21031 | Adapter(InterfaceGuid) Port down for peer PeerAddr. | Diagnostic |
| 21032 | Adapter(InterfaceGuid) Rx from PeerAddr, Ethertype EtherType, size Size. | Diagnostic |
| 21033 | Adapter(InterfaceGuid) UI Response, request type RequestType, response type … | Diagnostic |
| 21034 | Adapter(InterfaceGuid) Create discovery profiles, SSID SSID, BSS type BSSType, … | Diagnostic |
| 21035 | Tx pkt completion, pkt Context. | Diagnostic |
| 21036 | Adapter(InterfaceGuid) MSM Redo security request. | Diagnostic |
| 21037 | Connection health status is AdapterId (InterfaceGuid), HealthyHint Healthy. | Diagnostic |
| 21038 | Transition network suspected | Diagnostic |
| 21039 | UI Response - Valid = Valid, Cancelled = Cancelled. | Diagnostic |
| 21040 | Port(Context) MSMSendPacket failed, Error ErrorCode. | Diagnostic |
| 21041 | Can't do fast roaming when PMK Cache is not valid | Diagnostic |
| 21042 | PreAuthMgr Transition OldState --> NewState. | Diagnostic |
| 21043 | PreAuth: 802. | Diagnostic |
| 21044 | PreAuth: Explicit failure from 802. | Diagnostic |
| 21045 | PreAuth: 802. | Diagnostic |
| 21046 | Received unicast key material in EAPOL-Key (Rapid rekey RapidRekey). | Diagnostic |
| 21047 | CONNECTION SECURED by RC4 key exchange | Diagnostic |
| 21048 | CONNECTION SECURED by RSN key exchange | Diagnostic |
| 21049 | RSN Key Receive: Key Message M1 | Diagnostic |
| 21050 | RSN Key Receive: Key Message M3 | Diagnostic |
| 21051 | RSN Key Receive: Key Message M2 | Diagnostic |
| 21052 | RSN Key Receive: Key Message M4 | Diagnostic |
| 21053 | RSN Key Receive: Key Message G1 | Diagnostic |
| 21054 | RSN Key Receive: Key Message G2 | Diagnostic |
| 21055 | FAST ROAMING is FastRoam. | Diagnostic |
| 21056 | Unknown transition into Failure, EventType Context. | Diagnostic |
| 21057 | Port(PortId) Peer PeerAddr SecMgr Transition OldState --> NewState. | Diagnostic |
| 21058 | CONNECTION SECURED by WPA key exchange | Diagnostic |
| 21059 | WPA Key Receive: Key Message M1 | Diagnostic |
| 21060 | WPA Key Receive: Key Message M3 | Diagnostic |
| 21061 | WPA Key Receive: Key Message G1 | Diagnostic |
| 21062 | Eapol Key packet cache OVERFLOW | Diagnostic |
| 21063 | PMK Cache overflowed, current Current, limit Max. | Diagnostic |
| 21064 | WLAN Security Settings: BSS Type BSSType, Authentication AuthAlgoId, Encryption … | Diagnostic |
| 21065 | Received multicast key material in EAPOL-Key (Rapid rekey RapidRekey). | Diagnostic |
| 21066 | Default Key ID set to Index Index. | Diagnostic |
| 30000 | Connection started 1 | Diagnostic |
| 30001 | Connection timeout threshold reached 1 | Diagnostic |
| 30002 | Connection succeeded | Diagnostic |
| 30003 | Connection started 2 | Diagnostic |
| 30004 | Connection timeout threshold reached 2 | Diagnostic |
| 30005 | Connection started 3 | Diagnostic |
| 30006 | Connection timeout threshold reached 3 | Diagnostic |
| 30007 | Manual connect initiated, end running reconnect scenarios | Diagnostic |
| 30008 | Manual connect initiated, end running reconnect scenarios | Diagnostic |
| 30009 | Manual connect initiated, end running reconnect scenarios | Diagnostic |
| 30010 | UI interaction requested 1 | Diagnostic |
| 30011 | UI interaction requested 2 | Diagnostic |
| 30012 | UI interaction requested 3 | Diagnostic |
| 30013 | Connection succeeded - Hidden network 1 | Diagnostic |
| 30014 | Connection succeeded - Hidden network 2 | Diagnostic |
| 30015 | Connection succeeded - Hidden network 3 | Diagnostic |
| 30016 | Selection list exhausted 1 | Diagnostic |
| 30017 | Selection list exhausted 2 | Diagnostic |
| 30018 | Selection list exhausted 3 | Diagnostic |
| 30019 | Connection succeeded to previous network - expected roaming | Diagnostic |
| 30020 | | Diagnostic |
| 30021 | | Diagnostic |
| 30022 | | Diagnostic |
| 30100 | | Diagnostic |
| 30101 | | Diagnostic |
| 30102 | | Diagnostic |
| 30103 | | Diagnostic |
| 30104 | Cancel WLAN Resume-Reconnect Interface GUID: InterfaceGuid. | Diagnostic |
| 30105 | | Diagnostic |
| 40001 | Connect Diagnostic Information. | Diagnostic |
| 40002 | Limited Recovery Diagnostic Statistics. | Diagnostic |
| 40003 | Diagnostic Statistics Difference. | Diagnostic |
| 60001 | Error: ErrorCode Location: Location Context: Context. | Operational |
| 60002 | Warning: WarningCode Location: Location Context: Context. | Operational |
| 60003 | Transitioned to State: NextState Context: Context. | Operational |
| 60004 | Updated Context: Context Update Reason: UpdateReasonCode. | Operational |
| 60101 | SourceAddress: SourceAddress SourcePort: SourcePort DestinationAddress: … | Operational |
| 60102 | SourceAddress: SourceAddress SourcePort: SourcePort DestinationAddress: … | Operational |
| 60103 | Interface Guid: IfGuid IfIndex: IfIndex Interface Luid: IfLuid ReferenceContext: … | Operational |