Microsoft-Windows-NWiFi

117 events across 1 channel

Event ID	Title	Channel
10000	OID_DOT11_RESET_REQUEST Complete %3 ResetConfirmStatus=%4.	Diagnostic
10001	IOCTL function=.	Diagnostic
10002	Reject Scan Request.	Diagnostic
10003	IOCTL_DOT11_WEP_DEFAULT_KEY_VALUE: There is no association	Diagnostic
10004	Unsupported Mcast cipher algorithm %3.	Diagnostic
10005	Desired SSID List %3 entries.	Diagnostic
10006	SetDesiredSSIDList failed, status = %3.	Diagnostic
10007	Set DesiredBSSType.	Diagnostic
10008	Desired BSSID List %3 entries.	Diagnostic
10009	Enabled AuthList %3 entries.	Diagnostic
10010	Set ExcludeUnencrypted.	Diagnostic
10011	Set HiddenNetworkEnabled.	Diagnostic
10012	Drop cached M1: there is a pending 802.	Diagnostic
10013	Replay detected (our counter %3, received %4), dropping the packet.	Diagnostic
10014	Version number %3 not supported, Expecting %4.	Diagnostic
10015	Receive 1X packet G1: FrameSeq# %3: %4 ==> %5.	Diagnostic
10016	Receive 1X packet M1 (4 way handshake rekey - secure bit set): FrameSeq# %3: %4 …	Diagnostic
10017	Receive 1X packet M1: FrameSeq# %3: %4 ==> %5.	Diagnostic
10018	Receive 1X packet M3: FrameSeq# %3: %4 ==> %5.	Diagnostic
10019	Send 1X packet G2: %3 ==> %4.	Diagnostic
10020	Dot11ReceiveM1: aborted since the connection has changed	Diagnostic
10021	Send 1X packet M2: %3 ==> %4.	Diagnostic
10022	Dot11ReceiveM1 failed with status %3.	Diagnostic
10023	Dot11ReceiveM3 failed with status %3.	Diagnostic
10024	Dot11ReceiveM3: aborted since the connection has changed	Diagnostic
10025	Send 1X packet M4: %3 ==> %4.	Diagnostic
10026	Reject request of setting PMK since the caller is not current security endpoint	Diagnostic
10027	Receive 1X packet: FrameSeq#.	Diagnostic
10028	Send 1X packet: %3 ==> %4.	Diagnostic
10029	Abort OID request %2 (low power state): PowerState=%3, …	Diagnostic
10030	QueryAdapterSync Error: %3 OID %2.	Diagnostic
10031	RequestAdapterSync Error: %3 OID %2.	Diagnostic
10032	CallAdapterSync Error: %3 OID %2.	Diagnostic
10033	All MIC failure reports are sent.	Diagnostic
10034	Security endpoint type = %3.	Diagnostic
10035	IHV Serialization Enabled.	Diagnostic
10036	Safe mode = %3.	Diagnostic
10037	Reset %3 New MAC address %4 SetDefaultMIB=%5.	Diagnostic
10038	Reset %3 SetDefaultMIB=%5.	Diagnostic
10039	Reject Reset Request.	Diagnostic
10040	Association Start.	Diagnostic
10041	Association Completion: %3 AssocStatus=%4.	Diagnostic
10042	DisAssoc: %3 Reason: %4.	Diagnostic
10043	Defer roaming timer until system wakeup	Diagnostic
10044	Mismatched session ID	Diagnostic
10045	PortState: Auth Failed.	Diagnostic
10046	SetPortState: %4: Controlled=%5 Authorized=%6.	Diagnostic
10047	Post Virtual PortDown Notification (MAC=%4) to Security Module.	Diagnostic
10048	Unable to set OID_DOT11_PRIVACY_EXEMPTION_LIST Status = %3.	Diagnostic
10049	Cancel IOCTL_DOT11_CONNECT	Diagnostic
10050	OID_DOT11_CONNECT_REQUEST completes %3.	Diagnostic
10051	Fail Connect Request: Radio is off	Diagnostic
10052	Fail Connect Request in low power state.	Diagnostic
10053	IOCTL_DOT11_CONNECT	Diagnostic
10054	IOCTL_DOT11_DISCONNECT	Diagnostic
10055	OID_DOT11_DISCONNECT_REQUEST Status = %3.	Diagnostic
10056	OID_DOT11_NIC_POWER_STATE Status = %3.	Diagnostic
10057	Old PowerState=.	Diagnostic
10058	Change OpMode Failed: Capability is not supported (Configured = %3, IM supported …	Diagnostic
10059	Terminate the connection: too many TKIP-MIC countermeasures.	Diagnostic
10060	Pairwise Key (%1): Algo %2, Direction= %3, Len %4.	Diagnostic
10061	Group (Default) Key: Idx %1, Algo %2, Direction= %3, Len %4.	Diagnostic
10062	Connection Started	Diagnostic
10063	Connection Completion Status=.	Diagnostic
10064	OID_DOT11_NIC_POWER_STATE Request	Diagnostic
10066	802.	Diagnostic
10067	802.	Diagnostic
10068	802.	Diagnostic
10069	802.	Diagnostic
10070	802.	Diagnostic
10071	802.	Diagnostic
10072	Results of querying power management mode: current power management mode = %1, …	Diagnostic
10073	Adapter going to sleep, adapter guid = %1, new PowerState=%3, halted = %2.	Diagnostic
10074	Adapter resumed from sleep, adapter guid = %1.	Diagnostic
10075	Direct OID Request Pending: Request=.	Diagnostic
10076	Pending Direct OID Request Complete: Request=.	Diagnostic
10077	Diagnostic Statistics Difference Adapter Guid %1 TxUnicastCount: %2 …	Diagnostic
10078	[WiFiDs] Deferred PortDown Notification: Adapter Guid: %1, SessionId: %2, …	Diagnostic
10079	[WiFiDs] Disconnected standby is enabled: Adapter Guid: %1, DisconnectInStandby: …	Diagnostic
10080	[WiFiDs] Creating deferred PortDown notification: Adapter Guid: %1, SessionId: …	Diagnostic
10081	[WiFiDs] Indicating MediaDisconnect on sleep: Adapter Guid.	Diagnostic
10082	[WiFiDs] Waking from DisconnectedStandby: Adapter Guid.	Diagnostic
10083	[WiFiDs] Terminating connection since diassoc didn't occur on sleep: Adapter …	Diagnostic
10084	[Nwf] [Status]: %1: Status = %2 , Context1 = %3.	Diagnostic
10085	[SAE] FinalState: SAEStatus=.	Diagnostic
10086	[DumpBuff] %1 (%2 bytes).	Diagnostic
10087		Diagnostic
10088	[SAE] .	Diagnostic
10089	[SAE] [SAE-Fail]: Status = .	Diagnostic
10090	[WorkerRequestHandler]: %1 Context1 = %2, Context2 = %3.	Diagnostic
10091	*** NwifiNblSendCompletion ERROR - pNwifiNbl is corrupted - pNwifiNbl= %1, …	Diagnostic
10092	*** OriginalNblSendCompletion ERROR - pOriginalNBL is currupted - RefCount is 0 …	Diagnostic
20000	Resume from low power 1	Diagnostic
20001	Resume from low power 2	Diagnostic
20002	Port authorized 1	Diagnostic
20003	Port authorized 2	Diagnostic
20004	Resume from low power (End trailing scenario) 1	Diagnostic
20005	Resume from low power (End trailing scenario) 2	Diagnostic
20006	Resume from low power 3	Diagnostic
20007	Resume from low power 4	Diagnostic
20008	Port authorized 3	Diagnostic
20009	Resume from low power (End trailing scenario) 3	Diagnostic
20010	Resume from low power (End trailing scenario) 4	Diagnostic
20011	Resume from low power 5	Diagnostic
20012	Resume from low power 6	Diagnostic
20013	Resume from low power (End trailing scenario) 5	Diagnostic
20014	Resume from low power (End trailing scenario) 6	Diagnostic
20015	Port authorized 4	Diagnostic
20016	Resume Reconnect to Same/Different netwkr scenario	Diagnostic
20017		Diagnostic
60001	Error: %1 Location: %2 Context: %3.	Diagnostic
60002	Warning: %1 Location: %2 Context: %3.	Diagnostic
60003	Transitioned to State: %1 Context: %2.	Diagnostic
60004	Updated Context: %1 Update Reason: %2.	Diagnostic
60101	SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 …	Diagnostic
60102	SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 …	Diagnostic
60103	Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4.	Diagnostic

Event ID 10000 — OID_DOT11_RESET_REQUEST Complete %3 ResetConfirmStatus=%4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

OID_DOT11_RESET_REQUEST Complete %3 ResetConfirmStatus=%4

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—
`ResetStatus`	—

Event ID 10001 — IOCTL function=.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

IOCTL function=%3 Status=%4 Length=%5 bytes

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Function`	—
`Status`	—
`Length`	—

Event ID 10002 — Reject Scan Request.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Reject Scan Request: %3

Fields

Name	Description
`Reject_Scan_Request`	—
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10003 — IOCTL_DOT11_WEP_DEFAULT_KEY_VALUE: There is no association

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

IOCTL_DOT11_WEP_DEFAULT_KEY_VALUE: There is no association

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10004 — Unsupported Mcast cipher algorithm %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Unsupported Mcast cipher algorithm %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`AlgorithmId`	—

Event ID 10005 — Desired SSID List %3 entries.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Desired SSID List %3 entries

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`SSIDCount`	—
`SSIDList`	—

Event ID 10006 — SetDesiredSSIDList failed, status = %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

SetDesiredSSIDList failed, status = %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10007 — Set DesiredBSSType.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Set DesiredBSSType: %3

Fields

Name	Description
`Set_DesiredBSSType`	—
`ContextHandle`	—
`AdapterGuid`	—
`BSSType`	—

Event ID 10008 — Desired BSSID List %3 entries.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Desired BSSID List %3 entries

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`BSSIDCount`	—
`BSSIDList`	—

Event ID 10009 — Enabled AuthList %3 entries.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Enabled AuthList %3 entries

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`AuthCount`	—
`AuthAlgorithm`	—

Event ID 10010 — Set ExcludeUnencrypted.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Set ExcludeUnencrypted (%3): %4

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Value`	—
`Status`	—

Event ID 10011 — Set HiddenNetworkEnabled.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Set HiddenNetworkEnabled (%3): %4

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Value`	—
`Status`	—

Event ID 10012 — Drop cached M1: there is a pending 802.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Drop cached M1: there is a pending 802.1x exchange

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—

Event ID 10013 — Replay detected (our counter %3, received %4), dropping the packet.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Replay detected (our counter %3, received %4), dropping the packet

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`ExpectedCounter`	—
`ReceivedCounter`	—

Event ID 10014 — Version number %3 not supported, Expecting %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Version number %3 not supported, Expecting %4

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`ExpectedVer`	—
`ReceivedVer`	—

Event ID 10015 — Receive 1X packet G1: FrameSeq# %3: %4 ==> %5.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Receive 1X packet G1: FrameSeq# %3: %4 ==> %5

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`FrameSequence`	—
`SrcMAC`	—
`DestMAC`	—

Event ID 10016 — Receive 1X packet M1 (4 way handshake rekey - secure bit set): FrameSeq# %3: %4 ==> %5.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Receive 1X packet M1 (4 way handshake rekey - secure bit set): FrameSeq# %3: %4 ==> %5

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`FrameSequence`	—
`SrcMAC`	—
`DestMAC`	—

Event ID 10017 — Receive 1X packet M1: FrameSeq# %3: %4 ==> %5.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Receive 1X packet M1: FrameSeq# %3: %4 ==> %5

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`FrameSequence`	—
`SrcMAC`	—
`DestMAC`	—

Event ID 10018 — Receive 1X packet M3: FrameSeq# %3: %4 ==> %5.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Receive 1X packet M3: FrameSeq# %3: %4 ==> %5

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`FrameSequence`	—
`SrcMAC`	—
`DestMAC`	—

Event ID 10019 — Send 1X packet G2: %3 ==> %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Send 1X packet G2: %3 ==> %4

Fields

Name	Description
`Send_1X_packet_G2`	—
`ContextHandle`	—
`AdapterGuid`	—
`SrcMAC`	—
`DestMAC`	—

Event ID 10020 — Dot11ReceiveM1: aborted since the connection has changed

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Dot11ReceiveM1: aborted since the connection has changed

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—

Event ID 10021 — Send 1X packet M2: %3 ==> %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Send 1X packet M2: %3 ==> %4

Fields

Name	Description
`Send_1X_packet_M2`	—
`ContextHandle`	—
`AdapterGuid`	—
`SrcMAC`	—
`DestMAC`	—

Event ID 10022 — Dot11ReceiveM1 failed with status %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Dot11ReceiveM1 failed with status %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10023 — Dot11ReceiveM3 failed with status %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Dot11ReceiveM3 failed with status %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10024 — Dot11ReceiveM3: aborted since the connection has changed

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Dot11ReceiveM3: aborted since the connection has changed

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—

Event ID 10025 — Send 1X packet M4: %3 ==> %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Send 1X packet M4: %3 ==> %4

Fields

Name	Description
`Send_1X_packet_M4`	—
`ContextHandle`	—
`AdapterGuid`	—
`SrcMAC`	—
`DestMAC`	—

Event ID 10026 — Reject request of setting PMK since the caller is not current security endpoint

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Reject request of setting PMK since the caller is not current security endpoint

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10027 — Receive 1X packet: FrameSeq#.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Receive 1X packet: FrameSeq#%1: %2 ==> %3, Status %4

Fields

Name	Description
`FrameSequence`	—
`SrcMAC`	—
`DestMAC`	—
`Status`	—

Event ID 10028 — Send 1X packet: %3 ==> %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Send 1X packet: %3 ==> %4

Fields

Name	Description
`Send_1X_packet`	—
`ContextHandle`	—
`AdapterGuid`	—
`SrcMAC`	—
`DestMAC`	—

Event ID 10029 — Abort OID request %2 (low power state): PowerState=%3, bBlockOidsDueToLowPowerState=%4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Abort OID request %2 (low power state): PowerState=%3, bBlockOidsDueToLowPowerState=%4

Fields

Name	Description
`Adapter`	—
`OID`	—
`PowerState`	—
`bBlockOidsDueToLowPowerState`	—

Event ID 10030 — QueryAdapterSync Error: %3 OID %2.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

QueryAdapterSync Error: %3 OID %2

Fields

Name	Description
`QueryAdapterSync_Error`	—
`Adapter`	—
`OID`	—
`Status`	—

Event ID 10031 — RequestAdapterSync Error: %3 OID %2.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

RequestAdapterSync Error: %3 OID %2

Fields

Name	Description
`RequestAdapterSync_Error`	—
`Adapter`	—
`OID`	—
`Status`	—

Event ID 10032 — CallAdapterSync Error: %3 OID %2.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

CallAdapterSync Error: %3 OID %2

Fields

Name	Description
`CallAdapterSync_Error`	—
`Adapter`	—
`OID`	—
`Status`	—

Event ID 10033 — All MIC failure reports are sent.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

All MIC failure reports are sent. Notify miniport to disassociate from %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`MAC`	—

Event ID 10034 — Security endpoint type = %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Security endpoint type = %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`EndPointType`	—

Event ID 10035 — IHV Serialization Enabled.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

IHV Serialization Enabled: %3

Fields

Name	Description
`IHV_Serialization_Enabled`	—
`ContextHandle`	—
`AdapterGuid`	—
`Enabled`	—

Event ID 10036 — Safe mode = %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Safe mode = %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Enabled`	—

Event ID 10037 — Reset %3 New MAC address %4 SetDefaultMIB=%5.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Reset %3 New MAC address %4 SetDefaultMIB=%5

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`ResetType`	—
`MAC`	—
`DefaultMIB`	—

Event ID 10038 — Reset %3 SetDefaultMIB=%5.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Reset %3 SetDefaultMIB=%5

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`ResetType`	—
`MAC`	—
`DefaultMIB`	—

Event ID 10039 — Reject Reset Request.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Reject Reset Request: %3

Fields

Name	Description
`Reject_Reset_Request`	—
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10040 — Association Start.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Association Start: %3

Fields

Name	Description
`Association_Start`	—
`ContextHandle`	—
`AdapterGuid`	—
`MAC`	—

Event ID 10041 — Association Completion: %3 AssocStatus=%4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Association Completion: %3 AssocStatus=%4

Fields

Name	Description
`Association_Completion`	—
`ContextHandle`	—
`AdapterGuid`	—
`MAC`	—
`Status`	—

Event ID 10042 — DisAssoc: %3 Reason: %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

DisAssoc: %3 Reason: %4

Fields

Name	Description
`DisAssoc`	—
`Reason`	—
`ContextHandle`	—
`AdapterGuid`	—
`MAC`	—

Event ID 10043 — Defer roaming timer until system wakeup

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Defer roaming timer until system wakeup

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—

Event ID 10044 — Mismatched session ID

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Mismatched session ID

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`SessionId`	—

Event ID 10045 — PortState: Auth Failed.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

PortState: Auth Failed: %4

Fields

Name	Description
`PortState_Auth_Failed`	—
`ContextHandle`	—
`AdapterGuid`	—
`SessionId`	—
`MAC`	—

Event ID 10046 — SetPortState: %4: Controlled=%5 Authorized=%6.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

SetPortState: %4: Controlled=%5 Authorized=%6

Fields

Name	Description
`SetPortState`	—
`ContextHandle`	—
`AdapterGuid`	—
`SessionId`	—
`MAC`	—
`Controlled`	—
`Authorized`	—

Event ID 10047 — Post Virtual PortDown Notification (MAC=%4) to Security Module.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Post Virtual PortDown Notification (MAC=%4) to Security Module

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`SessionId`	—
`MAC`	—

Event ID 10048 — Unable to set OID_DOT11_PRIVACY_EXEMPTION_LIST Status = %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Unable to set OID_DOT11_PRIVACY_EXEMPTION_LIST Status = %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10049 — Cancel IOCTL_DOT11_CONNECT

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Cancel IOCTL_DOT11_CONNECT

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Irp`	—

Event ID 10050 — OID_DOT11_CONNECT_REQUEST completes %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

OID_DOT11_CONNECT_REQUEST completes %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10051 — Fail Connect Request: Radio is off

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Fail Connect Request: Radio is off

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`PowerState`	—

Event ID 10052 — Fail Connect Request in low power state.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Fail Connect Request in low power state: %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`PowerState`	—

Event ID 10053 — IOCTL_DOT11_CONNECT

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

IOCTL_DOT11_CONNECT

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Irp`	—

Event ID 10054 — IOCTL_DOT11_DISCONNECT

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

IOCTL_DOT11_DISCONNECT

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—

Event ID 10055 — OID_DOT11_DISCONNECT_REQUEST Status = %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

OID_DOT11_DISCONNECT_REQUEST Status = %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10056 — OID_DOT11_NIC_POWER_STATE Status = %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

OID_DOT11_NIC_POWER_STATE Status = %3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10057 — Old PowerState=.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Old PowerState=%3, New PowerState=%4

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`OldPowerState`	—
`NewPowerState`	—
`Halting`	—

Event ID 10058 — Change OpMode Failed: Capability is not supported (Configured = %3, IM supported = %4, MiniPort supported = %5).

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Change OpMode Failed: Capability is not supported (Configured = %3, IM supported = %4, MiniPort supported = %5)

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`ConfiguredOpMode`	—
`IMSupportedOpModes`	—
`MiniPortSupportedOpModes`	—

Event ID 10059 — Terminate the connection: too many TKIP-MIC countermeasures.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Terminate the connection: too many TKIP-MIC countermeasures.

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—

Event ID 10060 — Pairwise Key (%1): Algo %2, Direction= %3, Len %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Pairwise Key (%1): Algo %2, Direction= %3, Len %4

Fields

Name	Description
`Addr`	—
`CipherAlgoId`	—
`Direction`	—
`Len`	—

Event ID 10061 — Group (Default) Key: Idx %1, Algo %2, Direction= %3, Len %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Group (Default) Key: Idx %1, Algo %2, Direction= %3, Len %4

Fields

Name	Description
`Index`	—
`CipherAlgoId`	—
`Direction`	—
`Len`	—

Event ID 10062 — Connection Started

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Connection Started

Fields

Name	Description
`AdapterGuid`	—

Event ID 10063 — Connection Completion Status=.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Connection Completion Status=%2

Fields

Name	Description
`AdapterGuid`	—
`Status`	—

Event ID 10064 — OID_DOT11_NIC_POWER_STATE Request

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

OID_DOT11_NIC_POWER_STATE Request

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—

Event ID 10066 — 802.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

802.11 IM driver has begun to start the device network, adapter guid = %1, Local MAC addr = %3, SSID = %4

Fields

Name	Description
`InterfaceGuid`	—
`ContextHandle`	—
`MAC`	—
`SSID`	—

Event ID 10067 — 802.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

802.11 IM driver has finished starting the device network, adapter guid = %1, Local MAC addr = %3, SSID = %4

Fields

Name	Description
`InterfaceGuid`	—
`ContextHandle`	—
`MAC`	—
`SSID`	—

Event ID 10068 — 802.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

802.11 IM driver has failed to start the device network, error code = %2, adapter guid = %1, Local MAC addr = %4, SSID = %5

Fields

Name	Description
`InterfaceGuid`	—
`ErrorCode`	—
`ContextHandle`	—
`MAC`	—
`SSID`	—

Event ID 10069 — 802.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

802.11 IM driver has begun to stop the device network, adapter guid = %1, Local MAC addr = %3, SSID = %4

Fields

Name	Description
`InterfaceGuid`	—
`ContextHandle`	—
`MAC`	—
`SSID`	—

Event ID 10070 — 802.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

802.11 IM driver has finished stopping the device network, adapter guid = %1, Local MAC addr = %3, SSID = %4

Fields

Name	Description
`InterfaceGuid`	—
`ContextHandle`	—
`MAC`	—
`SSID`	—

Event ID 10071 — 802.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

802.11 IM driver has failed to stop the device network, error code = %2, adapter guid = %1, local MAC addr = %4, SSID = %5

Fields

Name	Description
`InterfaceGuid`	—
`ErrorCode`	—
`ContextHandle`	—
`MAC`	—
`SSID`	—

Event ID 10072 — Results of querying power management mode: current power management mode = %1, power management mode supported by AP = %2, adapter guid = %3, AP MA...

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Results of querying power management mode: current power management mode = %1, power management mode supported by AP = %2, adapter guid = %3, AP MAC addr = %4, AP SSID = %5

Fields

Name	Description
`PowerMgmtMode`	—
`PowerMgmtModeSupported`	—
`AdapterGuid`	—
`MAC`	—
`SSID`	—

Event ID 10073 — Adapter going to sleep, adapter guid = %1, new PowerState=%3, halted = %2.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Adapter going to sleep, adapter guid = %1, new PowerState=%3, halted = %2

Fields

Name	Description
`AdapterGuid`	—
`Halted`	—
`NewPowerState`	—

Event ID 10074 — Adapter resumed from sleep, adapter guid = %1.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Adapter resumed from sleep, adapter guid = %1

Fields

Name	Description
`AdapterGuid`	—

Event ID 10075 — Direct OID Request Pending: Request=.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Direct OID Request Pending: Request=%1 Adapter=%2

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10076 — Pending Direct OID Request Complete: Request=.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Pending Direct OID Request Complete: Request=%1 Adapter=%2 Status=%3

Fields

Name	Description
`ContextHandle`	—
`AdapterGuid`	—
`Status`	—

Event ID 10077 — Diagnostic Statistics Difference Adapter Guid %1 TxUnicastCount: %2 RxUnicastCount: %3 TxBroadcastCount: %4 RxBroadcastCount: %5 TxMulticastCount: ...

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Diagnostic Statistics Difference Adapter Guid %1 TxUnicastCount: %2 RxUnicastCount: %3 TxBroadcastCount: %4 RxBroadcastCount: %5 TxMulticastCount: %6 RxMulticastCount: %7 TimeDiffMs: %8

Fields

Name	Description
`RxUnicastCount`	1 TxUnicastCount.
`TxBroadcastCount`	—
`RxBroadcastCount`	—
`TxMulticastCount`	—
`RxMulticastCount`	—
`TimeDiffMs`	—
`AdapterGuid`	—
`TxUnicastCount`	—

Event ID 10078 — [WiFiDs] Deferred PortDown Notification: Adapter Guid: %1, SessionId: %2, Reason: %3, StatusCode: %4, SecurityEndpoint: %5.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[WiFiDs] Deferred PortDown Notification: Adapter Guid: %1, SessionId: %2, Reason: %3, StatusCode: %4, SecurityEndpoint: %5

Fields

Name	Description
`AdapterGuid`	—
`SessionId`	—
`Reason`	—
`StatusCode`	—
`SecurityEndpoint`	—

Event ID 10079 — [WiFiDs] Disconnected standby is enabled: Adapter Guid: %1, DisconnectInStandby: %2, EnforceDs: %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[WiFiDs] Disconnected standby is enabled: Adapter Guid: %1, DisconnectInStandby: %2, EnforceDs: %3

Fields

Name	Description
`AdapterGuid`	—
`DisconnectInStandby`	—
`EnforceDs`	—

Event ID 10080 — [WiFiDs] Creating deferred PortDown notification: Adapter Guid: %1, SessionId: %2, Reason: %3, StatusCode: %4, SecurityEndpoint: %5.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[WiFiDs] Creating deferred PortDown notification: Adapter Guid: %1, SessionId: %2, Reason: %3, StatusCode: %4, SecurityEndpoint: %5

Fields

Name	Description
`AdapterGuid`	—
`SessionId`	—
`Reason`	—
`StatusCode`	—
`SecurityEndpoint`	—

Event ID 10081 — [WiFiDs] Indicating MediaDisconnect on sleep: Adapter Guid.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[WiFiDs] Indicating MediaDisconnect on sleep: Adapter Guid: %1

Fields

Name	Description
`AdapterGuid`	—

Event ID 10082 — [WiFiDs] Waking from DisconnectedStandby: Adapter Guid.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[WiFiDs] Waking from DisconnectedStandby: Adapter Guid: %1

Fields

Name	Description
`AdapterGuid`	—

Event ID 10083 — [WiFiDs] Terminating connection since diassoc didn't occur on sleep: Adapter Guid.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[WiFiDs] Terminating connection since diassoc didn't occur on sleep: Adapter Guid: %1

Fields

Name	Description
`AdapterGuid`	—

Event ID 10084 — [Nwf] [Status]: %1: Status = %2 , Context1 = %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[Nwf] [Status]: %1: Status = %2 , Context1 = %3

Fields

Name	Description
`Nwf_Status`	[Nwf] [Status].
`StatusAnnotation`	—
`Status`	—
`Context1`	—

Event ID 10085 — [SAE] FinalState: SAEStatus=.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Fields

Name	Description
`param1`	—
`param2`	—
`param3`	—
`param4`	—
`param5`	—
`param6`	—

Event ID 10086 — [DumpBuff] %1 (%2 bytes).

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[DumpBuff] %1 (%2 bytes):

Fields

Name	Description
`BufferAnnotation`	—
`BufferLength`	—

Event ID 10087 —

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

%1

Fields

Name	Description
`LogLine`	—

Event ID 10088 — [SAE] .

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Fields

Name	Description
`param1`	—
`param2`	—
`param3`	—
`param4`	—
`param5`	—
`param6`	—
`param7`	—

Event ID 10089 — [SAE] [SAE-Fail]: Status = .

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Fields

Name	Description
`param1`	—
`param2`	—

Event ID 10090 — [WorkerRequestHandler]: %1 Context1 = %2, Context2 = %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

[WorkerRequestHandler]: %1 Context1 = %2, Context2 = %3

Fields

Name	Description
`WorkerRequestHandler`	[WorkerRequestHandler].
`StatusAnnotation`	—
`Context1`	—
`Context2`	—

Event ID 10091 — * NwifiNblSendCompletion ERROR - pNwifiNbl is corrupted - pNwifiNbl= %1, pNwifiNblContext= %2, Status= %3, pToS= %4, pCmplArray= %5 *.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

*** NwifiNblSendCompletion ERROR - pNwifiNbl is corrupted - pNwifiNbl= %1, pNwifiNblContext= %2, Status= %3, pToS= %4, pCmplArray= %5 ***

Fields

Name	Description
`pNwifiNbl`	—
`pNwifiNblContext`	—
`Status`	—
`pTOS`	—
`pBOS`	—

Event ID 10092 — *** OriginalNblSendCompletion ERROR - pOriginalNBL is currupted - RefCount is 0 - pNwifiNbl= %1, pOriginalNBL= %2, pOriginalNblContext= %3, Origina...

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

*** OriginalNblSendCompletion ERROR - pOriginalNBL is currupted - RefCount is 0 - pNwifiNbl= %1, pOriginalNBL= %2, pOriginalNblContext= %3, OriginalNblStatus= %4 ***

Fields

Name	Description
`pNwifiNblContext`	—
`pOriginalNBL`	—
`pOriginalNblContext`	—
`Status`	—

Event ID 20000 — Resume from low power 1

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power 1

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20001 — Resume from low power 2

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power 2

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20002 — Port authorized 1

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Port authorized 1

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20003 — Port authorized 2

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Port authorized 2

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20004 — Resume from low power (End trailing scenario) 1

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power (End trailing scenario) 1

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20005 — Resume from low power (End trailing scenario) 2

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power (End trailing scenario) 2

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20006 — Resume from low power 3

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power 3

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20007 — Resume from low power 4

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power 4

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20008 — Port authorized 3

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Port authorized 3

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20009 — Resume from low power (End trailing scenario) 3

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power (End trailing scenario) 3

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20010 — Resume from low power (End trailing scenario) 4

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power (End trailing scenario) 4

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20011 — Resume from low power 5

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power 5

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20012 — Resume from low power 6

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power 6

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20013 — Resume from low power (End trailing scenario) 5

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power (End trailing scenario) 5

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20014 — Resume from low power (End trailing scenario) 6

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume from low power (End trailing scenario) 6

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20015 — Port authorized 4

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Port authorized 4

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20016 — Resume Reconnect to Same/Different netwkr scenario

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Resume Reconnect to Same/Different netwkr scenario

Fields

Name	Description
`InterfaceGuid`	—

Event ID 20017 —

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Fields

Name	Description
`InterfaceGuid`	—

Event ID 60001 — Error: %1 Location: %2 Context: %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Error: %1 Location: %2 Context: %3

Fields

Name	Description
`Error`	—
`Location`	—
`Context`	—
`ErrorCode`	—

Event ID 60002 — Warning: %1 Location: %2 Context: %3.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Warning: %1 Location: %2 Context: %3

Fields

Name	Description
`Warning`	—
`Location`	—
`Context`	—
`WarningCode`	—

Event ID 60003 — Transitioned to State: %1 Context: %2.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Transitioned to State: %1 Context: %2

Fields

Name	Description
`NextState`	—
`Context`	—

Event ID 60004 — Updated Context: %1 Update Reason: %2.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Updated Context: %1 Update Reason: %2

Fields

Name	Description
`Updated_Context`	—
`Update_Reason`	—
`Context`	—
`UpdateReasonCode`	—

Event ID 60101 — SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6

Fields

Name	Description
`SourceAddress`	—
`SourcePort`	—
`DestinationAddress`	—
`DestinationPort`	—
`Protocol`	—
`ReferenceContext`	—

Event ID 60102 — SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6

Fields

Name	Description
`SourceAddress`	—
`SourcePort`	—
`DestinationAddress`	—
`DestinationPort`	—
`Protocol`	—
`ReferenceContext`	—

Event ID 60103 — Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4.

Provider: Microsoft-Windows-NWiFi
Channel: Diagnostic

Message

Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4

Fields

Name	Description
`Interface_Guid`	—
`IfIndex`	—
`Interface_Luid`	—
`ReferenceContext`	—
`IfGuid`	—
`IfLuid`	—